Automatic toilet roll paper packaging machine

This machine uses the Japanese technology electrical components, learning from Japan advanced technology and rich experience, with domestic and international advanced level. The machine speed is over 5 times the traditional manual packing. Automatic feeding, realized unmanned assembly.

　　One, the main configuration:

　　Imported electrical components, 12 thick plate welding, stainless steel countertops, mechanical cutting prevention and photoelectric anti cutting function.

　　Two, product characteristics:

　　Adopted the programmable controller (PLC) control, reduced the mechanical contact, lowly system failure rate, stable and reliable operation;

　　Frequency control. Change the packing speed only need rotate the potentiometer knob with the drive connected.

　　Main cabinet with 12mm thick steel plate welded. High speed operation, does not shake, the box never deformed, the service life of the machine can reach ten years;

　　The machine adopts gear chain type step less transmission. Rotate handle can change the length of packing bag.

　　Digital display function; can display the bag length, packing speed, sealing temperature, yield etc.;

　　Bidirectional optoelectronic tracking system, can guarantee the cutting film at the needed position, accurate cut-off point;

　　Automatic positioning stop function, can ensure that the shutdown does not scald film.

　　Installed leakage protection switch, can ensure that the human and machine safety

　　Three, Mechanical data:

　　Packaging capacity: 27packs per minute (according to the packaging film material, thickness and packaging specifications)

　　Packaging specifications: 2/4/6/8/10 volume

　　Operator: 9800mm x 2810mm x 1780mm size (length x width x height)

　　The total power: 4.24kw

　　Total weight: 1500kg

　　Type : GRT-600

　　Packaging capacity: 35packs per minute

　　Single roll specifications: (90~130)* (90~130)mm (diameter * length)

　　Packaging specifications: 2/4/6/8/10/12 volume

　　Bag specifications: (600 ~ 875mm) * (180 ~ 250) mm (90 ~ 130) * mm (length * width * height)

　　The packaging bag material: PE prefabricated bag

　　Film thickness: 45μm

　　Prefabricated bag stock: 2 bags stock, automatic switching, each bag is stored 400 prefabricated bag.

　　Operator: 3000 * 1750 * 1900mm(length * width * height, not including the feeding line and the discharging section)

　　The total power: 13.5kw, wherein the heating power of 0.7 Kw

　　Power : 380V 50HZ

　　Gas source: 0.5 ~ 0.7Mpa, the gas consumption: 30L/ minutes

　　Total weight: 3000kg

　　The noise of the machine: Less than 80dB